50gpd 5 stage r/o with inline di filter

5 Stage Reverse Osmosis RO and Di Unit

Our RO/Di units include a DI chamber fitted as the final stage of filtration

( which is supplied filled with high quality tulsion MB115 Resin).

After passing through the Pre filters (stage 1 -2 and 3) and the r/o membrane, the r/o filtered water is then passed through the DI filter, to reduce the TDS reading to 0.

The 5 Stages of Filtration Are:

1. 5 - Micron Sediment Filter Made of 100% Pure Polypropylene Fibres. Removes Dirt, Sand and Rust

          2.         A gac granular activated carbon filter Removes chlorine and organic compounds

3. A Carbon Block Filter Composed of High Performance Carbon. Removes Trihalomethanes, Pesticides, Volatile Organic Chemicals and 99.95% of Giardia and Cryptosporidium Cysts

  4. High Rejection Thin Film Composite Reverse Osmosis Membranes The Membranes Remove Contaminants Present in your Water Including, up to 99% of Dissolved Salts, Lead, Copper, Barium, Bacterial By-Products, Oestrogen and Silica

5. DI Cartridge filled with tulsion MB115 mixed bed resin for total De-ionisation (polishing the water) of your reverse osmosis water

Enabling you to achieve a total dissolved solids (TDS) of 0ppm

These Superb Systems Come with Installation Instructions, and all Pipes, Pre Filters, Post Filters, and Fittings Required for easy Installation

please note

The input water must meet the following criteria for the unit to operate

Water temp must be less than 45 degrees Celsius

iron content max 0.1ppm

min mains water pressure 40psi (80psi min for optimum production amounts)

Ph 3 to 11

Mains water tds reading below 1000ppm